5.0 on Google “Raul’s team is the best in the biz.” — Keegan
Our Work FAQ About Contact Service Areas

Skim Coating · Camas, WA

Upstairs Skim Coat and Orange Peel in Camas, WA

Our crew redid the whole upstairs of this Camas home. We skim coated the walls and ceilings, wrapped the windows with drywall and corner bead, primed with PVA, and finished everything in orange peel texture.

Job Date
Photos Show
Before and After
Location
Camas, Washington
Published
Upstairs bedroom in Camas, WA after skim coating, with orange peel texture on the walls and sloped ceiling
An upstairs bedroom after skim coat, PVA, and orange peel. The window is still masked from spraying.

The Upstairs Scope

We pulled the trim, patched and repaired as needed, and wrapped the windows four ways with drywall and corner bead. Then we skim coated all the walls and ceilings, put on PVA primer, and finished with orange peel texture.

The before photos show what we started with. Old texture, patches on the walls and ceilings, and trim already off the doorways and windows.

The after photos were taken right after texture, so the floors are still covered and the windows and light fixtures are still masked. Every room upstairs ends up with the same smooth base and the same orange peel finish.

Before and After, Room by Room

Each before photo is followed by an after photo from the same part of the upstairs, once the skim coat and texture were done.

Upstairs bedroom before skim coating, with ceiling patches and an open attic hatch in Camas, WA
Before. Old texture, patched spots on the ceiling, and an attic hatch framed out with new corner bead.
Finished attic hatch opening with orange peel texture on the sloped ceiling
An attic hatch after. The opening is finished and the ceiling has its new orange peel texture.
Upstairs stair landing before skim coating, with corner bead on the walls
The stair landing before. Trim is off and new corner bead is on the outside corners.
Stair landing after skim coat, PVA primer, and orange peel texture
The stair landing after skim coat, PVA, and texture.
Bedroom doorway with patched wall spots before skim coating
Patches around the doorway and on the walls before the skim coat.
Bedroom doorway and sloped walls after skim coating and texture
A bedroom doorway after. The walls around it are skimmed and textured with no patches showing.
Small upstairs room before skim coating, with a window opening and old wall surface
A smaller upstairs room before. Trim is pulled and the walls still show the old surface.
Window wrapped four ways with drywall and corner bead after texture
The window after. It's wrapped on all four sides with drywall and corner bead, then textured.
Close view of new orange peel texture on a sloped upstairs ceiling
A close look at the new orange peel texture on the ceiling.

Planning a Skim Coat in Camas

If your walls are full of old patches and tired texture, a skim coat gives you one even surface to start from. We finish it with the orange peel or other texture you want, and we handle the patches and repairs along the way.

We work all over Camas and the rest of Clark County. Send us a few photos for an estimate, or look through more of our drywall projects.

From the Blog

Latest Posts

Call Now Get a Free Quote